2D WaterJet CALYPSO SHARK 5 X 10
2D WaterJet CALYPSO SHARK 5 X 10 was manufactured by the machine manufacturer CALYPSO. Machine CALYPSO SHARK 5 X 10 was built in 1997 year.
General data | |
|---|---|
| Location | United States |
| region | California |
| Year of manufacture | 1997 |
| Warranty | Without warranty |
Technical parameters | |
|---|---|
| Length of the working table | 1651 mm |
| Width of the working table | 3683 mm |
| Maximum table load (evenly distributed) | 4535.9 kg |
| Travel length Z-axis | 152.4 mm |
| Maximum feed rate in X-axis | 2.5 m/min |
| Maximum feed rate in Y-axis | 2.5 m/min |
| Maximum feed rate in Z-axis | 2.5 m/min |
| Pump power | 22.4 kW |
| Maximum working pressure | 379.2 MPa |
Equipment | |
|---|---|
| no data | |
