CHEVALIER
Year of manufacture : 2014
CNC control model : CHEVALIER
Length of the working table : 600 mm
Width of the working table : 300 mm
Diameter of a new grinding wheel : 355 mm
CNC control model : CHEVALIER
Length of the working table : 600 mm
Width of the working table : 300 mm
Diameter of a new grinding wheel : 355 mm
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2001
CNC control model : SIEMENS 810D Manual Turn
Maximum turning length (Z-axis) : 3000 mm
Turning diameter over bed (max) : 815 mm
Turning diameter over cross slide (max) : 460 mm
CNC control model : SIEMENS 810D Manual Turn
Maximum turning length (Z-axis) : 3000 mm
Turning diameter over bed (max) : 815 mm
Turning diameter over cross slide (max) : 460 mm
Netherlands
Gelderland
Gelderland
Year of manufacture : 1992
Length of the working table : 457.2 mm
Width of the working table : 152.4 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 457.2 mm
Maximum length of grinding (without the grinding wheel output) X-axis : 482.6 mm
Length of the working table : 457.2 mm
Width of the working table : 152.4 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 457.2 mm
Maximum length of grinding (without the grinding wheel output) X-axis : 482.6 mm
Canada
Year of manufacture : 1991
Maximum machining current : 50 A
Length of the table : 690.6 mm
Width of the table : 390.5 mm
Maximum travel length X-axis : 400.1 mm
Maximum machining current : 50 A
Length of the table : 690.6 mm
Width of the table : 390.5 mm
Maximum travel length X-axis : 400.1 mm
4500 USD
United States
Maryland
Maryland
Year of manufacture : 1998
Length of the working table : 350 mm
Width of the working table : 200 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 350 mm
Minimum longitudinal feed rate (Z-axis) : 5 m/min
Length of the working table : 350 mm
Width of the working table : 200 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 350 mm
Minimum longitudinal feed rate (Z-axis) : 5 m/min
8023 USD
France
Bas-Rhin
Bas-Rhin
Year of manufacture : 1990
Length of the working table : 1000 mm
Width of the working table : 450 mm
Permanent magnetic chuck
Tilting magnetic chuck
Length of the working table : 1000 mm
Width of the working table : 450 mm
Permanent magnetic chuck
Tilting magnetic chuck
France
Seine-Saint-Denis
Seine-Saint-Denis
Year of manufacture : 1996
Length of the working table : 1066.8 mm
Width of the working table : 228.6 mm
Power of the spindle drive : 2.2 kW
Minimum rotary speed of the spindle : 60 1/min
Length of the working table : 1066.8 mm
Width of the working table : 228.6 mm
Power of the spindle drive : 2.2 kW
Minimum rotary speed of the spindle : 60 1/min
United States
Minnesota
Minnesota
Year of manufacture : 1995
Length of the working table : 406.4 mm
Width of the working table : 1016 mm
Maximum length of grinding (without the grinding wheel output) X-axis : 1092.2 mm
Maximum width of grinding (without the grinding wheel output) Y-axis : 457.2 mm
Length of the working table : 406.4 mm
Width of the working table : 1016 mm
Maximum length of grinding (without the grinding wheel output) X-axis : 1092.2 mm
Maximum width of grinding (without the grinding wheel output) Y-axis : 457.2 mm
22500 USD
United States
California
California
Year of manufacture : 2001
CNC control model : FAGOR CNC CONTROL
Maximum turning length (Z-axis) : 899.2 mm
Turning diameter over bed (max) : 459.7 mm
Maximum travel length in the X-axis : 279.4 mm
CNC control model : FAGOR CNC CONTROL
Maximum turning length (Z-axis) : 899.2 mm
Turning diameter over bed (max) : 459.7 mm
Maximum travel length in the X-axis : 279.4 mm
United States
South Carolina
South Carolina
Year of manufacture : 2001
CNC control model : ANILAM 4200 T-PLUS
Maximum turning length (Z-axis) : 1498.6 mm
Turning diameter over bed (max) : 609.6 mm
Turning diameter over cross slide (max) : 368.3 mm
CNC control model : ANILAM 4200 T-PLUS
Maximum turning length (Z-axis) : 1498.6 mm
Turning diameter over bed (max) : 609.6 mm
Turning diameter over cross slide (max) : 368.3 mm
United States
South Carolina
South Carolina
Year of manufacture : 1996
Maximum height of the grinded workpieces (for a new grinding wheel) : 457 mm
Maximum length of grinding (without the grinding wheel output) X-axis : 457 mm
Diameter of a new grinding wheel : 203 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 457 mm
Maximum length of grinding (without the grinding wheel output) X-axis : 457 mm
Diameter of a new grinding wheel : 203 mm
Spain
Year of manufacture : 2003
CNC control model : SIEMENS SINUMERIK 810 D
Maximum turning length (Z-axis) : 900 mm
Turning diameter over bed (max) : 460 mm
Turning diameter over cross slide (max) : 230 mm
CNC control model : SIEMENS SINUMERIK 810 D
Maximum turning length (Z-axis) : 900 mm
Turning diameter over bed (max) : 460 mm
Turning diameter over cross slide (max) : 230 mm
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2004
CNC control model : SIEMENS SINUMERIK 810 D MANU
Maximum turning length (Z-axis) : 1000 mm
Turning diameter over bed (max) : 460 mm
Turning diameter over cross slide (max) : 230 mm
CNC control model : SIEMENS SINUMERIK 810 D MANU
Maximum turning length (Z-axis) : 1000 mm
Turning diameter over bed (max) : 460 mm
Turning diameter over cross slide (max) : 230 mm
Germany
Bayern
Bayern
Year of manufacture : 1988
Length of the working table : 457.2 mm
Width of the working table : 203.2 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 457.2 mm
Power of the spindle drive : 1.5 kW
Length of the working table : 457.2 mm
Width of the working table : 203.2 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 457.2 mm
Power of the spindle drive : 1.5 kW
11500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2002
CNC control model : FANUC O-MD
Length of the working table : 1198.9 mm
Width of the working table : 449.6 mm
Power of the spindle drive : 11.2 kW
CNC control model : FANUC O-MD
Length of the working table : 1198.9 mm
Width of the working table : 449.6 mm
Power of the spindle drive : 11.2 kW
United States
Florida
Florida
Year of manufacture : 1996
Length of the working table : 457.2 mm
Width of the working table : 146.1 mm
Power of the spindle drive : 1.6 kW
Maximum rotary speed of the spindle : 3450 1/min
Length of the working table : 457.2 mm
Width of the working table : 146.1 mm
Power of the spindle drive : 1.6 kW
Maximum rotary speed of the spindle : 3450 1/min
United States
Florida
Florida
Year of manufacture : 1998
CNC control model : FAGOR 800 T
Maximum turning length (Z-axis) : 1524 mm
Turning diameter over bed (max) : 370 mm
Maximum power of the main spindle : 20 kW
CNC control model : FAGOR 800 T
Maximum turning length (Z-axis) : 1524 mm
Turning diameter over bed (max) : 370 mm
Maximum power of the main spindle : 20 kW
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1985
Length of the working table : 800 mm
Width of the working table : 400 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 620 mm
Maximum rotary speed of the spindle : 1750 1/min
Length of the working table : 800 mm
Width of the working table : 400 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 620 mm
Maximum rotary speed of the spindle : 1750 1/min
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1995
Length of the working table : 2000 mm
Width of the working table : 610 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 850 mm
Power of the spindle drive : 24 kW
Length of the working table : 2000 mm
Width of the working table : 610 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 850 mm
Power of the spindle drive : 24 kW
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1990
Length of the working table : 1000.1 mm
Width of the working table : 400.1 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 619.1 mm
Power of the spindle drive : 3.7 kW
Length of the working table : 1000.1 mm
Width of the working table : 400.1 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 619.1 mm
Power of the spindle drive : 3.7 kW
United States
New York
New York
Year of manufacture : 1998
Length of the working table : 800.1 mm
Width of the working table : 400.1 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 619.1 mm
Power of the spindle drive : 3.7 kW
Length of the working table : 800.1 mm
Width of the working table : 400.1 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 619.1 mm
Power of the spindle drive : 3.7 kW
United States
New York
New York
Year of manufacture : 2000
CNC control model : CHEVALIER CNC CONTROL
Maximum turning length (Z-axis) : 1500 mm
Turning diameter over bed (max) : 610 mm
Turning diameter over cross slide (max) : 370 mm
CNC control model : CHEVALIER CNC CONTROL
Maximum turning length (Z-axis) : 1500 mm
Turning diameter over bed (max) : 610 mm
Turning diameter over cross slide (max) : 370 mm
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1993
CNC control model : PROTO TRAK MX 2
Length of the working table : 1270 mm
Width of the working table : 254 mm
Power of the spindle drive : 2.2 kW
CNC control model : PROTO TRAK MX 2
Length of the working table : 1270 mm
Width of the working table : 254 mm
Power of the spindle drive : 2.2 kW
United States
Ohio
Ohio
Year of manufacture : 2001
CNC control model : SIEMENS CNC CONTROL
Maximum turning length (Z-axis) : 2000 mm
Turning diameter over bed (max) : 610 mm
Turning diameter over cross slide (max) : 370 mm
CNC control model : SIEMENS CNC CONTROL
Maximum turning length (Z-axis) : 2000 mm
Turning diameter over bed (max) : 610 mm
Turning diameter over cross slide (max) : 370 mm
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2000
Maximum length of the grinding (shaft) : 1498.6 mm
Maximum diameter of the grinding (shaft) : 378.5 mm
Maximum weight of the shaft between the centers : 149.7 kg
Power of the grinding wheel spindle drive : 3.7 kW
Maximum length of the grinding (shaft) : 1498.6 mm
Maximum diameter of the grinding (shaft) : 378.5 mm
Maximum weight of the shaft between the centers : 149.7 kg
Power of the grinding wheel spindle drive : 3.7 kW
United States
Illinois
Illinois
Year of manufacture : 1994
Length of the working table : 812.8 mm
Width of the working table : 406.4 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 619.1 mm
Power of the spindle drive : 3.7 kW
Length of the working table : 812.8 mm
Width of the working table : 406.4 mm
Maximum height of the grinded workpieces (for a new grinding wheel) : 619.1 mm
Power of the spindle drive : 3.7 kW
United States
Illinois
Illinois
Year of manufacture : 1996
Length of the working table : 609.6 mm
Width of the working table : 304.8 mm
Power of the spindle drive : 3.7 kW
Maximum distance from the table to the spindle axis : 628.7 mm
Length of the working table : 609.6 mm
Width of the working table : 304.8 mm
Power of the spindle drive : 3.7 kW
Maximum distance from the table to the spindle axis : 628.7 mm
United States
Illinois
Illinois
Year of manufacture : 1990
Length of the working table : 600.1 mm
Width of the working table : 298.5 mm
Power of the spindle drive : 3.7 kW
Maximum distance from the table to the spindle axis : 501.7 mm
Length of the working table : 600.1 mm
Width of the working table : 298.5 mm
Power of the spindle drive : 3.7 kW
Maximum distance from the table to the spindle axis : 501.7 mm
United States
Illinois
Illinois
Year of manufacture : 1990
Length of the working table : 650.9 mm
Width of the working table : 298.5 mm
Power of the spindle drive : 3.7 kW
Maximum diameter of a grinding wheel : 355.6 mm
Length of the working table : 650.9 mm
Width of the working table : 298.5 mm
Power of the spindle drive : 3.7 kW
Maximum diameter of a grinding wheel : 355.6 mm
United States
Illinois
Illinois
Year of manufacture : 1989
Length of the working table : 508 mm
Width of the working table : 254 mm
Power of the spindle drive : 2.2 kW
Maximum distance from the table to the spindle axis : 546.1 mm
Length of the working table : 508 mm
Width of the working table : 254 mm
Power of the spindle drive : 2.2 kW
Maximum distance from the table to the spindle axis : 546.1 mm
United States
Illinois
Illinois
CNC Lathes and Turning Centers CHEVALIER
CNC Lathes and Turning Centers CHEVALIER FCL-1840 [2]CNC Lathes and Turning Centers CHEVALIER FCL-2460 [2]
Milling Machines CHEVALIER
Milling Machines CHEVALIER FM-3VS [1]CNC Milling Machines and Machining Centers CHEVALIER
CNC Milling Machines and Machining Centers CHEVALIER VMC 4020 [1]CNC Milling Machines and Machining Centers CHEVALIER FALCON FM-3 VKH [1]
Grinding Machines CHEVALIER
Grinding Machines CHEVALIER FSG-1224 AD [3]Grinding Machines CHEVALIER FSG-1640 AD [3]
Electrical Discharge Machines CHEVALIER
Electrical Discharge Machines CHEVALIER DM 422 [1]
