DAEWOO / page 2
Year of manufacture : 1999
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 533.4 mm
Turning diameter over bed (max) : 510.5 mm
Maximum power of the main spindle : 14.9 kW
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 533.4 mm
Turning diameter over bed (max) : 510.5 mm
Maximum power of the main spindle : 14.9 kW
United States
Wisconsin
Wisconsin
Year of manufacture : 2000
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 492 mm
Turning diameter over bed (max) : 550 mm
Turning diameter over cross slide (max) : 390 mm
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 492 mm
Turning diameter over bed (max) : 550 mm
Turning diameter over cross slide (max) : 390 mm
France
Rhône
Rhône
Year of manufacture : 2001
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 2100 mm
Turning diameter over bed (max) : 700 mm
Turning diameter over cross slide (max) : 550 mm
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 2100 mm
Turning diameter over bed (max) : 700 mm
Turning diameter over cross slide (max) : 550 mm
France
Rhône
Rhône
Year of manufacture : 2001
CNC control model : FANUC 16-MC
Length of the working table : 1200 mm
Width of the working table : 550 mm
Maximum table load (evenly distributed) : 800 kg
CNC control model : FANUC 16-MC
Length of the working table : 1200 mm
Width of the working table : 550 mm
Maximum table load (evenly distributed) : 800 kg
Italy
Year of manufacture : 2001
CNC control model : FANUC 16-MC
Length of the working table : 1200 mm
Width of the working table : 550 mm
Maximum table load (evenly distributed) : 800 kg
CNC control model : FANUC 16-MC
Length of the working table : 1200 mm
Width of the working table : 550 mm
Maximum table load (evenly distributed) : 800 kg
Italy
Year of manufacture : 2001
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 583 mm
Turning diameter over bed (max) : 450 mm
Maximum travel length in the X-axis : 250 mm
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 583 mm
Turning diameter over bed (max) : 450 mm
Maximum travel length in the X-axis : 250 mm
Italy
Year of manufacture : 1998
CNC control model : FANUC 18-M
Length of the working table : 650.2 mm
Width of the working table : 449.6 mm
Maximum table load (evenly distributed) : 299.4 kg
CNC control model : FANUC 18-M
Length of the working table : 650.2 mm
Width of the working table : 449.6 mm
Maximum table load (evenly distributed) : 299.4 kg
United States
Wisconsin
Wisconsin
Year of manufacture : 1995
CNC control model : FANUC OT-C
Maximum turning length (Z-axis) : 490 mm
Turning diameter over bed (max) : 310 mm
Maximum travel length in the X-axis : 210 mm
CNC control model : FANUC OT-C
Maximum turning length (Z-axis) : 490 mm
Turning diameter over bed (max) : 310 mm
Maximum travel length in the X-axis : 210 mm
14714 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1995
CNC control model : FANUC OT-C
Maximum turning length (Z-axis) : 490 mm
Turning diameter over bed (max) : 310 mm
Maximum travel length in the X-axis : 210 mm
CNC control model : FANUC OT-C
Maximum turning length (Z-axis) : 490 mm
Turning diameter over bed (max) : 310 mm
Maximum travel length in the X-axis : 210 mm
14714 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 2007
CNC control model : FANUC 21i-TB
Maximum turning length (Z-axis) : 668 mm
Turning diameter over bed (max) : 550.9 mm
Turning diameter over cross slide (max) : 350.8 mm
CNC control model : FANUC 21i-TB
Maximum turning length (Z-axis) : 668 mm
Turning diameter over bed (max) : 550.9 mm
Turning diameter over cross slide (max) : 350.8 mm
United States
California
California
Year of manufacture : 1994
CNC control model : FANUC OT
Maximum turning length (Z-axis) : 660.4 mm
Turning diameter over bed (max) : 500.4 mm
Turning diameter over cross slide (max) : 330.2 mm
CNC control model : FANUC OT
Maximum turning length (Z-axis) : 660.4 mm
Turning diameter over bed (max) : 500.4 mm
Turning diameter over cross slide (max) : 330.2 mm
United States
California
California
Year of manufacture : 1999
CNC control model : MITSUBISHI MELDAS 64
Length of the working table : 1198.9 mm
Width of the working table : 500.4 mm
Power of the spindle drive : 14.9 kW
CNC control model : MITSUBISHI MELDAS 64
Length of the working table : 1198.9 mm
Width of the working table : 500.4 mm
Power of the spindle drive : 14.9 kW
29500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1997
CNC control model : MITSUBISHI MELDAS 64
Length of the working table : 1198.9 mm
Width of the working table : 500.4 mm
Maximum table load (evenly distributed) : 798.3 kg
CNC control model : MITSUBISHI MELDAS 64
Length of the working table : 1198.9 mm
Width of the working table : 500.4 mm
Maximum table load (evenly distributed) : 798.3 kg
26500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2001
CNC control model : FANUC 21 M
Length of the working table : 990.6 mm
Width of the working table : 431.8 mm
Power of the spindle drive : 14.9 kW
CNC control model : FANUC 21 M
Length of the working table : 990.6 mm
Width of the working table : 431.8 mm
Power of the spindle drive : 14.9 kW
47500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1998
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 548.6 mm
Turning diameter over bed (max) : 510.5 mm
Turning diameter over cross slide (max) : 330.2 mm
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 548.6 mm
Turning diameter over bed (max) : 510.5 mm
Turning diameter over cross slide (max) : 330.2 mm
39500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1999
CNC control model : FANUC 21-M
Length of the working table : 1193.8 mm
Width of the working table : 508 mm
Power of the spindle drive : 14.9 kW
CNC control model : FANUC 21-M
Length of the working table : 1193.8 mm
Width of the working table : 508 mm
Power of the spindle drive : 14.9 kW
United States
Florida
Florida
Year of manufacture : 2004
CNC control model : FANUC 0i-MB
Length of the working table : 1000.8 mm
Width of the working table : 449.6 mm
Power of the spindle drive : 11.2 kW
CNC control model : FANUC 0i-MB
Length of the working table : 1000.8 mm
Width of the working table : 449.6 mm
Power of the spindle drive : 11.2 kW
United States
Florida
Florida
Year of manufacture : 2001
CNC control model : FANUC 16 M
Length of the working table : 400.1 mm
Width of the working table : 400.1 mm
Power of the spindle drive : 22.4 kW
CNC control model : FANUC 16 M
Length of the working table : 400.1 mm
Width of the working table : 400.1 mm
Power of the spindle drive : 22.4 kW
United States
Florida
Florida
Year of manufacture : 2006
CNC control model : FANUC 18i-MB
Length of the working table : 629.9 mm
Width of the working table : 629.9 mm
Power of the spindle drive : 24.6 kW
CNC control model : FANUC 18i-MB
Length of the working table : 629.9 mm
Width of the working table : 629.9 mm
Power of the spindle drive : 24.6 kW
United States
Florida
Florida
Year of manufacture : 2002
CNC control model : FANUC 16i-M
Length of the working table : 500.4 mm
Width of the working table : 500.4 mm
Power of the spindle drive : 18.7 kW
CNC control model : FANUC 16i-M
Length of the working table : 500.4 mm
Width of the working table : 500.4 mm
Power of the spindle drive : 18.7 kW
United States
Florida
Florida
Year of manufacture : 2010
CNC control model : FANUC CNC CONTROL
Length of the working table : 497.8 mm
Width of the working table : 497.8 mm
Maximum table load (evenly distributed) : 499.9 kg
CNC control model : FANUC CNC CONTROL
Length of the working table : 497.8 mm
Width of the working table : 497.8 mm
Maximum table load (evenly distributed) : 499.9 kg
United States
California
California
Year of manufacture : 2004
CNC control model : FANUC 18i-MB
Number of tools in the magazine : 60 pcs
Maximum rotary speed of the spindle : 14000 1/min
Travel length X-axis (mechanical feed) : 838.2 mm
CNC control model : FANUC 18i-MB
Number of tools in the magazine : 60 pcs
Maximum rotary speed of the spindle : 14000 1/min
Travel length X-axis (mechanical feed) : 838.2 mm
United States
California
California
Year of manufacture : 2001
CNC control model : FANUC 16i-MB
Length of the working table : 609.6 mm
Width of the working table : 609.6 mm
Number of tools in the magazine : 60 pcs
CNC control model : FANUC 16i-MB
Length of the working table : 609.6 mm
Width of the working table : 609.6 mm
Number of tools in the magazine : 60 pcs
United States
California
California
Year of manufacture : 2000
CNC control model : FANUC 18i
Length of the working table : 1198.9 mm
Width of the working table : 500.4 mm
Maximum table load (evenly distributed) : 799.2 kg
CNC control model : FANUC 18i
Length of the working table : 1198.9 mm
Width of the working table : 500.4 mm
Maximum table load (evenly distributed) : 799.2 kg
United States
New York
New York
Year of manufacture : 1997
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 762 mm
Turning diameter over bed (max) : 558.8 mm
Turning diameter over cross slide (max) : 381 mm
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 762 mm
Turning diameter over bed (max) : 558.8 mm
Turning diameter over cross slide (max) : 381 mm
United States
New York
New York
Year of manufacture : 1997
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 330.2 mm
Turning diameter over bed (max) : 510.5 mm
Turning diameter over cross slide (max) : 348 mm
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 330.2 mm
Turning diameter over bed (max) : 510.5 mm
Turning diameter over cross slide (max) : 348 mm
United States
New York
New York
Year of manufacture : 2004
CNC control model : FANUC 18i-MB
Length of the working table : 650 mm
Width of the working table : 650 mm
Maximum table load (evenly distributed) : 299 kg
CNC control model : FANUC 18i-MB
Length of the working table : 650 mm
Width of the working table : 650 mm
Maximum table load (evenly distributed) : 299 kg
United States
Michigan
Michigan
Year of manufacture : 1998
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 330 mm
Turning diameter over bed (max) : 460 mm
Turning diameter over cross slide (max) : 279 mm
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 330 mm
Turning diameter over bed (max) : 460 mm
Turning diameter over cross slide (max) : 279 mm
United States
Michigan
Michigan
Year of manufacture : 2004
CNC control model : FANUC 21i-T
Maximum turning length (Z-axis) : 487.9 mm
Maximum turning diameter : 419.1 mm
Maximum travel length in the X-axis : 268 mm
CNC control model : FANUC 21i-T
Maximum turning length (Z-axis) : 487.9 mm
Maximum turning diameter : 419.1 mm
Maximum travel length in the X-axis : 268 mm
United States
Michigan
Michigan
Year of manufacture : 1998
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 439.4 mm
Turning diameter over bed (max) : 510.5 mm
Turning diameter over cross slide (max) : 330.2 mm
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 439.4 mm
Turning diameter over bed (max) : 510.5 mm
Turning diameter over cross slide (max) : 330.2 mm
United States
Michigan
Michigan
CNC Lathes and Turning Centers DAEWOO
CNC Lathes and Turning Centers DAEWOO PUMA 8HC [2]CNC Lathes and Turning Centers DAEWOO PUMA 12 L [2]
CNC Milling Machines and Machining Centers DAEWOO
CNC Milling Machines and Machining Centers DAEWOO MYNX-500 [3]CNC Milling Machines and Machining Centers DAEWOO ACE M 500 [2]
