- UniMachines
- ›
- Mechanical Presses
- ›
- Eccentric Presses
- ›
- Eccentric Presses CFUM
- ›
- Eccentric Presses CFUM PMS 16 CP
Eccentric Press CFUM PMS 16 CP
Eccentric Press CFUM PMS 16 CP was manufactured by the machine manufacturer CFUM. Machine CFUM PMS 16 CP was built in 1989 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 1989 |
| Warranty | Without warranty |
| Technical condition | Good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Maximum force (pressing) | 16 t |
| Length of the bottom working table | 500 mm |
| Width of the bottom working table | 355 mm |
| Maximum number of strokes per minute (manual work) | 140 1/min |
| Maximum number of strokes per minute (automatic work) | 165 1/min |
| Adjustment of the slider | 63 mm |
| Maximum distance between the table and the slider (at the lower position of the slider) | 220 mm |
| Power demand | 1.5 kW |
| Compressed air pressure | 0.3 MPa |
| Diameter of the hole in the working table | 160 mm |
| Diameter of the hole in the bolster plate | 80 mm |
| Machine height | 2015 mm |
| Machine length | 1050 mm |
| Machine width | 860 mm |
| Machine weight | 1.3 t |
Equipment | |
|---|---|
| Pneumatic ejector | |
| Foot control | |
| Bolster plate | |
| Central lubrication | |
| Lighting | |
| Technical documentation | |
