- UniMachines
- ›
- Milling Machines
- ›
- Toolroom Milling Machines
- ›
- Toolroom Milling Machines MARGHITA
- ›
- Toolroom Milling Machines MARGHITA FUS 32
Toolroom Milling Machine MARGHITA FUS 32
Toolroom Milling Machine MARGHITA FUS 32 was manufactured by the machine manufacturer MARGHITA. Machine MARGHITA FUS 32 was built in 1987 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 1987 |
| Warranty | Without warranty |
| Technical condition | Good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Length of the working table | 1000 mm |
| Width of the working table | 320 mm |
| Travel length X-axis (mechanical feed) | 550 mm |
| Travel length Y-axis (mechanical feed) | 320 mm |
| Travel length Z-axis (mechanical feed) | 400 mm |
| Maximum feed rate in X-axis | 400 mm/s |
| Total power demand | 3 kW |
| Number of T-slots in the table | 5 pcs |
| Machine height | 1780 mm |
| Machine length | 1546 mm |
| Machine width | 1222 mm |
| Machine weight | 1.7 t |
Equipment | |
|---|---|
| Swivel head (1 axis) | |
| Quill feed | |
| Spindle drive on overarm | |
| Slotting head | |
| Additional high speed head | |
| Boring head | |
| Swivel working table (2 axis) | |
| Automatic feed in the axis X and Y | |
| Automatic feed in the axis Z | |
| Rapid feed of the table | |
| Independent feed drive for each axis | |
| Angular machine vice | |
| Rotary table | |
| Dividing head | |
| Tailstock | |
| Overarm for dividing head and tailstock | |
| Arbor support | |
| Central lubrication | |
| Liquid cooling system | |
| Lighting | |
| Technical documentation | |
