Technical parameters |
|---|
| Maximum force (pressing) |
30 t |
| Table length (X) |
1778 mm |
| Table width (Y) |
1270 mm |
| Maximum travel length X-axis |
1778 mm |
| Maximum travel length Y-axis |
1270 mm |
| Maximum length of the sheet metal (X) |
3048 mm |
| Maximum width of the sheet metal (Y) |
1500 mm |
| Maximum table load (evenly distributed) |
100 kg |
| Maximum punching speed (number of impacts per minute) |
350 1/min |
| Maximum marking speed (number of impacts per minute) |
350 1/min |
| Maximum tool diameter |
150 mm |
| Number of tools in the turret |
58 pcs |
| Number of indexed stations in the turret |
2 pcs |
| Maximum stroke of the upper tool |
1 mm |
| Maximum rotary speed of the turret |
30 1/min |
| Time of the change of tools in the turret |
6 s |
| Maximum feed rate in X-axis |
0.058 m/min |
| Maximum feed rate in Y-axis |
0.058 m/min |
| Maximum feed rate with simultaneous operation of the X and Y axis drives |
0.706 m/min |
| Accuracy of programming |
0.015 mm |
| Accuracy of positioning |
0.015 mm |
| Total power demand |
18 kW |
| Number of clamps for gripping the sheet metal |
2 pcs |
| Maximum stroke of the lower tool |
1 mm |
| Number of tools in the additional storage |
1 pcs |
| Oil tank capacity |
1 l |
| Pressure in the hydraulic system |
1 MPa |
| Consumption of compressed air per hour |
0 dm3 |
| Compressed air pressure |
1 MPa |
| Machine height |
210 mm |
| Machine length |
430 mm |
| Machine width |
250 mm |
| Machine weight |
13 t |
