- UniMachines
- ›
- Punching Machines for sheet metal
- ›
- Turret Punch Presses
- ›
- Turret Punch Presses FINN-POWER
- ›
- Turret Punch Presses FINN-POWER A 5 F
Turret Punch Press FINN-POWER A 5 F
Turret Punch Press FINN-POWER A 5 F was manufactured by the machine manufacturer FINN-POWER. Machine FINN-POWER A 5 F was built in 2002 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 2002 |
| Warranty | Without warranty |
| Technical condition | Good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Maximum force (pressing) | 23.5 t |
| Maximum travel length X-axis | 2584 mm |
| Maximum travel length Y-axis | 1317 mm |
| Maximum length of the sheet metal (X) | 2530 mm |
| Maximum width of the sheet metal (Y) | 1270 mm |
| Maximum table load (evenly distributed) | 200 kg |
| Number of indexed stations in the turret | 20 pcs |
| Maximum feed rate in X-axis | 80 m/min |
| Maximum feed rate in Y-axis | 60 m/min |
| Maximum feed rate with simultaneous operation of the X and Y axis drives | 100 m/min |
| Total power demand | 20 kW |
| Oil tank capacity | 330 l |
| Compressed air pressure | 0.6 MPa |
| Machine height | 2500 mm |
| Machine length | 5400 mm |
| Machine width | 5600 mm |
| Machine weight | 13.5 t |
Equipment | |
|---|---|
| FANUC 16iPA | |
| CNC control | |
| Technical documentation | |
