Universal Lathe ZMM CU 502
Universal Lathe ZMM CU 502 was manufactured by the machine manufacturer ZMM. Machine ZMM CU 502 was built in 1984 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 1984 |
| Warranty | Without warranty |
| Technical condition | Good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Turning diameter over bed (max) | 500 mm |
| Turning diameter over cross slide (max) | 300 mm |
| Turning diameter in gap | 690 mm |
| Spindle bore | 70 mm |
| Minimum rotary speed of the spindle | 11.2 1/min |
| Maximum rotary speed of the spindle | 2000 1/min |
| Total power demand | 7.5 kW |
| Weight of the lathe | 3.1 t |
Equipment | |
|---|---|
| 3-jaw chuck | |
| 4-jaw chuck | |
| Tailstock with a hydraulical quill | |
| Metric threads | |
| Inch threads | |
